11
WM540 High Performance Microstepping Driver
_____________________________________________________________________________________________
d controller (pulse
tablished at least 3
υ
s before the first pulse of the next pulse train. Please examine time diagrams of the three control
gnals as follows.
10. Connection Diagram for Driver, Motor, Controller
A complete stepping system should include stepping motor, stepping driver, power supply an
nerator).
ge
A typical connection is shown below:
Figure 10: Driver connection in a stepping system
11. Control signal Waveform and Timing
This driver can accept pulse control signals up to 500KHz. Before a direction reversal, direction signal needs to be
es
si
* For the European Market – the maximum input voltage must be limited to 70VDC to comply with CE regulations.
