manualshive.com logo in svg

Wheatstone Corporation E-4, Техническое руководство

Поделиться
Скачать
Wheatstone Corporation E-4 Скачать руководство пользователя страница 28

M A S T E R   P A N E L

page  3 – 4

E-4 / Jan 2009

E-4 Mixer Outputs

E-4 Mixer Inputs

the INPUT SOURCE knob will cause that source to be switched to
the input of the channel. If you fail to press the knob, the display will
revert to its original setting after a timeout of approximately 4
seconds, and the original source remains in effect. Note you can
also simply click in the SOURCE window on the Input Tab, or press
the INPUT SOURCE knob on the Master panel, and select the
desired Source from the signal list.

• When no SET button is pressed, pressing the INPUT SOURCE

knob will open a screen showing a full list of input sources and
locations for quick source selection on a fader, or for making other
connections within the system. This operation may be denied to a
user in the Access Authorization settings.

Sources can also be selected in the XPoint program.

The XPoint matrix is analagous to an electronic patch bay.

Audio sources (router inputs) are located along the X axis at the top,
audio destinations (router outputs) are vertically stacked along the
Y axis on the left side. Simply click at the intersection of the desired
Source and Destination signals to “patch” them. All surface mixes
(eg. PGM busses, MixMinus, etc.) appear as Sources, usually
beginning at signal ID1001. All surface inputs (faders, talk back, monitor source
selects, etc.) appear as destinations, also beginning at signal ID1001. Surface
signals may be routed just like any user i/o.

Содержание E-4



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды