background image

 

 

6

4.

 

Features

 

 

z

 

Up to 5 channels (zone) 

z

 

6 selectable input s MIC 1 (First Priority) 

z

 

Bass, treble, and volume control for each channel 

z

 

Voice priority function on MIC. 1 

z

 

Overload, over temperature, and speaker short protection. 

z

 

8 ohm, 70V, and 100V output 

z

 

AC power in 

z

 2U 

height 

z

 

19” rack or table mounted 

 

 

5. Power Source

 

 

z

 

AC Power Source 

 

The supply transformer has been designed for use on either 115V or 230V, (50-60Hz), 
selected by a push switch on the rear panel. The amplifier is factory set at 230Vac mains 
voltage. When you switch the amplifier to 115V , the internal fuse must must be changed 
from 4 to 8 amp. 

 

6. Connection

 

 

z

 

Microphone Connection 

 

Mic1~2 inputs are unbalanced standard 1/4” Phone Jack.

 

 

 

 

 
Mute Function 

 

Priority Microphone, Mic1 input has VOX priority over CH 1~5. Press the push switch of 
each channel on the front panel to mute the corresponding signal source. 

 

General Mute Function 

Input at the backside for mute of all 5 channels

Use potential free relay contact.

Содержание AMP 550/100V









Отзывы: