WhatsGPS S288G, Руководство пользователя

Страница: 9 / 17

5.2、Installation steps and parameter settings:
① Disassemble the screws and insert the SIM card
into the SIM card holder on the circuit board. When
taking the circuit board, please be careful not to
touch the components on the circuit board as much
as possible to avoid static damage to the circuit
board.
② Turn on the backup battery switch. Under normal
conditions, the circuit board starts to charge and the
indicator light is on;
③ Select the car power access point and connect the
external input power to the terminal;
④ After the lights are flashing normally, you can start
the parameters of the SMS setting terminal. The
specific setting instructions are as follows:
SS,*CMNET*,**,**,*IP*,*port*,*device system number
*,*sim card number*,*123456*
*APN：Telecom carrier access address, such as
CMNET;
*PORT：server port;
*IMEI number：device ID，11-digit length number
starting with 13;
*SMS service number: The service short signal will
be applied when the terminal actively reports the