Wharfedale Pro SL424USB, Руководство по эксплуатации и инструкция пользователя

Страница: 10 / 15

OPERATING MANUAL AND USER GUIDE
9
Follow these few steps and you are on your way to a great sounding mix!
• Set the first channel LEVEL control in the “12 o’clock” position. All others down (-∞)
• Speak into your mic (or start source material) and while watching the metering, slowly increase the
level using the GAIN control at the top of the channel. The CLIP (RED) LED should only flicker.
• Adjust the EQ , keeping in mind that EQ adjustment will affect the output level.
• If the CLIP LED illuminates constantly, turn the GAIN control down (anti-clockwise) until the LED
flickers.
• Repeat for each channel used.
• Adjust the MAIN MIX control so that the CLIP LED only flickers – AVOID CONSTANT
ILLUMINATION!
• Once the mixer has an acceptable gain structure match each device in the signal chain, from the
mixer to the amplifiers. Your target will be to get each device working at its optimum level, resulting
in a mix with a good signal to noise ratio.
The USB connector enables computers with USB connectivity to interface directly with an SL Series
mixer for full duplex recording and playback. In recent years the introduction of USB connectivity
has ushered a new appreciation of the capabilities of computer audio, helping to fuse both digital
and analogue and open up endless possibilities for the recording musician.
The internal AD (Analogue to Digital) and DA (Digital to Analogue) converters are 16-bit/48KHz
enabling recording and playback above CD quality, ensuring that recordings that you make with an
SL Series Mixer have outstanding quality.
The SL Series are fully class compliant and require no drivers when used with modern operating
systems. Mac OSX, Windows XP, Vista and 7 will require no additional driver software.
Windows XP Installation
Simply choose the device in the following location: Start/Settings/Control Panel/Sounds and Audio
Devices/Audio
Mac OSX Installation
Simply select as an input and output device using the "Audio MIDI Setup" page, you can find this
easily using the spotlight function.
USB INTERFACE