Kinetic Series
6
KINETIC SERIES CONNECTION PANELS
Kinetic Series loudspeakers feature parallel wired inputs. Either input can be used
for a simple system, and 2 speakers can be parallel wired using a standard
speaker cable. When parallel wiring loudspeakers always take into consideration
the load you are putting on your amplifier. 2 parallel wired Kinetic loudspeakers
will produce a 2 ohm load.
Kinetic
8/12/12M/15/153/215
Rear Panel
Kinetic 18B
Rear Panel
The Kinetic 18B has a High Pass Filter output. The high pass filter allows you to
connect a fullrange Kinetic loudpeaker and subwoofer to one amplifier channel
with a 4 ohm load.
IMPORTANT NOTE:
To avoid any possible damage to your amp and speakers, be sure to
check the owners manual of your power amplifier to confirm it is
capable of operating at 2 ohms.
Kinetic User Manual Final.indd 6
2011-6-15 9:39:47
