Wharfedale Pro EZ-M, Руководство пользователя, Страница: 6 / 14

Low Impedance (Low Z) MIC Input
he low noise, high headroom “Low Z” MIC inputs are
phones.
NOTE:
hese ¼” Tip, Ring, Sleeve (TRS) jacks are designed
c ith (-10 to +4dBu) balanced or unbalanced
line level sources.
GAIN Control
order to achieve the best signal to noise ratio and
a the input preamp level of the
Mic/Line
D bar-
ent
ke
L nel 1) will light up when the input
signal is driven too high. This indicates that the signal is
overloading the preamp and causing distortion.
4
1
T
for use with balanced, low impedance dynamic micro
Condenser microphones will not work on this
mixer.
LINE IN
T
to be onnected w
In
adequ te dynamic range,
channel is adjusted with a GAIN control on each
mono channel. Set the GAIN control by watching the LE
graph meters—above the MAIN MIX level control in the
Master section of the mixer—while the signal source for that
channel is active (whether it be a microphone or an instrum
connected to the LINE IN of the channel). The ideal level is
between 0dB and +6dB on the bar graph meters.
If the CLIP LED on the channel lights up consistently, the
GAIN control is set too high. It is acceptable for the CLIP
LED to flash periodically especially with loud instruments li
drums or during peak sound levels during loud portions of a
performance.
CLIP LED
The C IP LEDs (on chan
1
2
3
2
3
4
4