DW
Series
2
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1. Please read and retain these safety instructions.
2. Heed all warnings in the operating instructions and on the appliance.
3. Do not use this apparatus near water or moisture.
4. Clean only with a dry cloth.
5. Install in a good quality 19" equipment rack.
6. Do not install near sources of heat such as radiators, heat registers, stoves or other apparatus
that produce heat.
7. Refer all servicing to authorised personnel.
8. There are no user serviceable parts inside this product. Users should not attempt to service this
product. Warranty nullification could result if this is attempted.
9. Servicing is required when the apparatus has been damaged in any way including: Impact
damage, power cord/supply damage, liquid spillages, small objects falling into the unit or
exposure to moisture. In addition please refer to authorised service personnel if the apparatus
is not operating normally.
10. To completely disconnect this equipment from the AC mains disconnect the power plug from
the AC receptacle.
11. To prevent fire never place the unit near any naked flame such as a candle.
12. Do not defeat the purpose of the polarized or grounding type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are there for your safety. If the plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
13. USING AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is advisable
to establish and follow a routine for powering up and powering down a sound system. With all
system components connected, turn on source equipment (mixers, signal processors, record
and playback units, etc.) BEFORE powering up amplifiers. Transient voltages from powering
up source equipment can damage speakers if amplifiers are already turned on. Make sure that
amplifier volumes are set to their minimum settings and power up any system amplifiers LAST.
It is recommended that all system components be allowed to stabilize for several seconds
before any source signals are introduced or level setting adjustments are made. Similarly, when
shutting systems down, turn all amplifiers off first, before powering down any other system
components.
14. CABLES – Do not use shielded or microphone cables for connection between amplifiers and
speakers. Use only approved speaker cables with proper connectors.
15. RIGGING – SUSPENDING – MOUNTING – Rigging, suspending and mounting of speaker
systems can expose members of the public to serious health risks and even death. UNDER
NO CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT SOUND
REINFORCEMENT PRODUCTS UNLESS YOU ARE FULLY QUALIFIED AND CERTIFIED
TO DO SO BY RELEVANT LOCAL, STATE AND NATIONAL AUTHORITIES. ALL RELEVANT
SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT PROPERLY QUALIFIED
OR DO NOT KNOW OF PERTINENT REGULATIONS, CONSULT QUALIFIED PERSONNEL
FOR ADVICE.
16. CAUTION – Professional sound reinforcement systems are capable of generating very high
sound pressure levels. Take care with placement and operation to avoid exposure to excessive
volume levels. Permanent hearing damage can result when operated to extreme levels.
