Wharfedale Pro Achromatic series, Инструкция по эксплуатации

Страница: 4 / 15

PREPARING THE TOWERS
ATTACHING THE PLINTH
Place a soft cloth on the floor to protect the
speaker.
Invert the loudspeaker and place it on the cloth.
Place the plinth on the loudspeaker noting the
orientation.
Align the plinth with the mounting holes in the
base of the speaker.
Attach all four screws firmly to secure the plinth.
ATTACHING THE SPIKES
CAUTION: SPIKES ARE SHARP.
Make sure that there are no wires or hidden
obstacles that could be damaged by the spikes
in the immediate operational area of the
speakers.
NEVER drag a loudspeaker on its spikes. Always
lift it. If the item is heavy get assistance.
A mounting hole is located at each corner of the
plinth. Thread a spike through each hole.
Tighten the collar finger tight so that the spike
is secure but not locked in place.
After all the spikes are attached, invert the
loudspeaker and place it carefully on the floor.
LEVELLING THE TOWERS
Loosen the top collar on each spike one turn.
Place a small spirit level on the plinth.
If the floor is not perfectly level you will find that one spike is off the ground. Starting with this spike, unscrew it so that it touches
the floor. Move the other spikes in and out so the speaker does not wobble and is level front and back and sideways. Now tighten
the top collars to lock the spikes firmly in position
4
All manuals and user guides at all-guides.com