CONNECT SERIES
0
Logic
TM
0
0
0
0
0
0
0
0
0
0
0
0
-15 +15
0
-15 +15
0
-15 +15
0
-15 +15
0
-15 +15
0
0
+15
-15
USB In
USB to Phones
USB to Main
WALKTHOUGH—CONNECT 1002FX/USB (also for 1202)
2
3
4
5
6
7
8
9
0
8
3
9
20
23
22 2
2
4
5
6
7
. Balanced XLR input for microphone
2. Balanced/Unbalanced TRS input for line level sources
3. Gain control for calibrating sources and applying correct gain structure
4. High EQ centred at 2kHz
5. Mid EQ centred at kHz
6. Low EQ centred at 80Hz
7/2. Set the amount of signal to the internal FX processor
and AUX output path
8/13. Pan/Balance used to spatially place the channel within the stereo field
9. Clip LED lit when the signal is overloaded
0/4. Sets the amount of signal sent to the main mix bus
11. Activate the high pass filter with 80Hz cut-off point
5. Select the sensitivity for the different level sources.
6. Set the amount of signal to the headphones output
7. Controls the master level of the main outputs
8. Display the realtime level present at the main output bus
9. To connect headphones
20. Send the signal out to the external effector
or the external AUX instrument
2. Send the signal out for the control room monitoring
22. Balanced/unbalanced TRS main outputs
23. Balanced/Unbalanced TRS input for line level sources (for the STEREO channel)
