whaler 220 Dauntless, Руководство пользователя

Страница: 34 / 80

2-6
220 Dauntless
Section 2 • General Information
R
Through Hull Fittings
Fig. 2.6.1
1
2
3
1
3
ANCHOR LOCKER DRAIN
RAW WATER INTAKE (OPTIONAL)
LIVEWELL INTAKE
BOW LOCKER DRAIN
1
2
3
4
5
1
2
3
4
5
2
Through Hull Fittings, Aft
Fig. 2.6.2
BILGE PUMP OUTLET
PORT & STARBOARD DECK DRAINS
LIVEWELL DRAIN (STANDARD)
HELMSEAT LIVEWELL DRAIN (OPTIONAL)
GARBOARD DRAIN
Location of Thru-Hull Fittings
NOTICE
•
The deck drain provides self-bailing capabilities while the boat is static in the water and no
passengers on board. This feature prevents the accumulation of water in the cockpit. the drain
plug must be in place when underway.
•
Depending on the type of boat you have, you may have underwater fittings that need drain plugs.
Garboard drain plugs and fishbox drain plugs need to be in place before the boat goes into the
water. Any fitting that will be underwater needs to be plugged or the seacock needs to be closed
•
Through hull fittings should be checked for proper seal annually. When the boat is in the water the
underwater fittings can be checked for dripping. It is recommended that the underwater fittings
be removed, cleaned and resealed every other year.
•
If the through hull fittings need to be replaced, it is recommended that an authorized Boston
Whaler
®
dealer perform this type of repair. Through hull fittings that are improperly installed can
cause premature hull failure and may void the Boston Whaler
®
limited warranty.
2
4
4