6
Assembly Instructions
5. Align and attach the Left Leg (E) to Top Shelf Frame (A) by threading two 1-1/4” Bolts (5) with
the Washers (7 and 8) from inside the shelf frame through the drilled holes on side rail and
screw into the threaded sockets on the Leg. Make sure that the pre-attached Floor Leveler at the
bottom of the leg is located at the front of the unit.
6. Fasten the Left Leg (E) to the Lower Shelf Frames (B and C) by using three 1” Bolts (4).
7. Repeat the same procedure to attach the Right Leg (F) at the opposite side.
8. Stand the unit upright.
B
C
A
E
F
E/F
B/C
4
5
8
7
E/F
A
1-1/4” Bolt
(4 used in this step)
⑤
If you choose the Table-top configuration,
continue to the next step.
If mounting the TV to the Floating Swivel
Mount, skip ahead to PAGE 12.
1” Bolt
(6 used in this step)
④
Lock Washer
(4 used in this step)
⑦
Flat Washer
(4 used in this step)
⑧
