11
Assembly Instructions
17.
Now, go back and securely tighten all the cam locks and screws. Make sure that all the parts are tight
and there are no gaps between the parts. This will help keep the unit square.
18.
Pick up the Middle Back Panel (P) and align the pre-drilled holes against the upper long edge with the
pilot holes on the back rail of Top Panel (A). Attach the Middle Back Panel (P) in place with provided
15 mm Washer Head Screws (5).
19.
Using the pilot holes as a guide, align and attach the Side Back Panels (O and Q) to the mantel frame
with the provided 15 mm Washer Head Screws (5).
NOTE:
We recommend attaching back panel with washer head screws at the corners first.
20.
Ask for assistance to lift the assembly unit upright and position it near the final installation location.
21.
Insert sixteen Shelf Supports (14) into the holes at the desired height inside each side compartment.
Make sure you place four shelf supports in the same level, so the shelf is not tilted. Tilt and rest the Left
and Right Adjustable Shelves (L and M) onto the Shelf Supports (14) and secure them (L and M) into
place with 12 mm Flat Head Screws (4).
D
E
B
P
Q
O
O/P/Q
5
L
L
M
M
L/M
14
4
D
E
F
D
