Model # TGXLGT46DW
Whalen Furniture Mfg., Inc.
Page 9
Factory # 56-12089
Assembly Instructions
9. Go back and tighten all bolts with the Allen Wrench provided.
10. Put the Suction Cups (1) firmly into the top holes of Top and Bottom Shelf Frames (A and B).
Attach the Glass Clamps (9) to the threaded inserts on both Front Posts (C and D) and Wood
Back Supports (F). Make sure you place the Glass Clamps in the same level so the shelf is not
tilted and set screw on each Glass Clamp is bottom.
Tip
: If a suction cup resists insertion, try pressing down on the middle of the cup with the Allen
Wrench while twisting it clockwise into the hole.
11. Properly install the Top Glass (G) and Glass Shelves (H) with the black side of glass down.
Rotating clockwise the Set Screw underneath Glass Clamps to secure the Middle Glass Shelf in
place and to prevent falling easily and getting damage.
12. In case of uneven floor, Floor Levelers are provided at the bottom of both Front Posts (C and D).
Simply tilt the unit back and raise or lower floor leveler by hand to correct tilting.
Note: If glass is scratched you can minimize the damage by using a BLACK marker and filling in
scratched area from underneath.
Glass Clamp w/Bolt
(4 used in this step)
⑨
Suction Cup
(14 used in this step)
①
G
C/D
C/D/F
9
H
9
9
H
H
A
