Model # SPLS-RBK-WH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Manufacturing
Page 4
Factory No. 15548
Assembly Instructions
1.
Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a
carpeted floor or the empty carton to avoid any scratch.
2.
Locate the Side Frames (A) and Top Panel (B) with the holes facing up. Securely screw the Cam Bolts
(2) into the designated small holes as shown in the illustration.
3.
Insert four Wood Dowels (3) into the inner end holes of each Shelf (C) at both ends. Tap in with a
rubber mallet, if necessary. Make sure that you use a small amount of glue with both ends of all dowels.
NOTE: It is very important to use a small amount of glue on both ends of dowels.
4.
Align the large holes on one Side Frame (A) with the inserted Wood Dowels (3) on the Shelves (C), and
then press them together. Make sure that the Cam Locks will face the floor. Secure the Shelves (C) in
place by engaging six Cam Locks (1) (Refer to page 2 on Cam Lock system operation supplement).
5.
Repeat the same procedure to attach the other Side Frame (A) at the opposite end.
2
B
A
A
2
2
2
2
2
2
2
A
A
C
C
C
1
3
1
1
1
3
3
3
3
3
1
