Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg. Inc
Factory No. 5-1571
Page # 6
Assembly Instructions
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go back and fully
tighten all bolts, this will make it easier during assembly of unit
.
1.
Unpack the unit and confirm that you have all hardware and parts required.
2.
Attach Desk Back Panel (F) to Drawer Pedestal (C) using three 1 1/4" Bolts with Flat Washers
(1 & 3) through the cleat holes into the threaded inserts on the Pedestal. See detail # 1.
3.
Proceed to attach Desk Side Panel (G) to the Desk Back Panel (F) with the 1 1/4" Bolts and Flat
Washers (1 & 3). See detail # 1.
4.
Insert Desk Drawer Box (H) into place, between the Drawer Pedestal (C) and Desk Side Panel
(G), to attach the drawer box in place using the 1 1/4” Bolts (1) through the Flat Washers (3)
into the threaded inserts on the Pedestal (to be able to insert the bolts you will need to remove
the drawer from the box, please don’t put back until you finish your assembly). See detail # 1.
5.
At the other side attach the box with two 1 1/4" Bolts (1) through the Flat Washer (3) into the
Desk Side Panel (G). See detail # 1.
Parts Provided
Qty
Tools Required
C –Drawer Pedestal
(1)
Phillips Screwdriver
F- Desk Back Panel
(1)
G –Desk Side Panel
(1)
H – Desk Drawer Box
(1)
(1)–1 1/4” Bolt
(10)
(3)– Flat Washer
(10)