ASSEMBLY INSTRUCTIONS
CARE AND MAINTENANCE
•
Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
•
You can clean the vanity with a gentle, non-abrasive household cleaner. Make sure to dry the wood immediately
with a soft cloth or towel.
•
The granite top can be cleaned using standard granite cleaning agents (sold separately).
•
Keep product away from direct sunlight as it may damage the finish.
4
5
5a. The door panels are reversible.
5b. The doors of this unit are shipped with the trim facing the front of the unit.
You can keep the doors as they are, or reverse the insert panel with the
flat panel forward, depending on the desired configuration.
Step 5: Door Insert Panel Installation
This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship,
the manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled
incorrectly, misused, abused by overloading, altered in any way or damaged due to accident. This warranty is not transferable
and does not cover chipping, flaking, scratches, rust, dents, or other damages to the surfaces of this product. Responsibility
of the manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential,
incidental, or other damages or losses resulting from product failure.
This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights and you may
have other rights which vary from state to state.
ONE-YEAR LIMITED WARRANTY
5
4
REPLACEMENT PARTS LIST
PART
DESCRIPTION
PART #
C
Backsplash
*LWS60HBVW-01-B
D
Left Door
*LWS60HBVW-02-LD
E
Right Door
*LWS60HBVW-03-RD
F
Door Inner Wood Panel
*LWS60HBVW-04-DIWP
AA
Door Pull with Bolt
*LWS60HBVW-05-DPB
BB
Drawer Handle with Bolt
*LWS60HBVW-05-DWB
CC Plastic Holder with Screw
*LWS60HBVW-06-PHS
DD
Slow Close Hinge
*LWS60HBVW-07-SCH
FF
Leveler
*LWS60HBVW-08-L
AA
CC
E
D
C
DD
FF
Printed in Vietnam
B
Plastic Holder
Date: 2019-07-24 Rev. 0001-A
For replacement parts, call our customer service department at 1-866-942-5362, 8:30 am – 4:30 pm,
PST, Monday to Friday.
Note:
The adjustable shelf is pre-installed for shipping. If the shelf
position is not to your liking, you will need to reposition the shelf by
following the steps below:
4a. Look under the shelf, and locate the wood screws holding the shelf to the
shelf supports.
4b. Remove the wood screws from each shelf support with a Phillips
screwdriver (not included).
4c. Remove the adjustable shelf from the vanity (B).
4d. Remove the shelf supports from the vanity (B) and re-position them in
the desired location. Make sure you place the shelf supports in the same
level so the shelf is not tilted.
4e. Place the adjustable shelf back onto the shelf supports.
4f. Using the Phillips screwdriver, reinstall the wood screws through the shelf
supports and into the shelf.
Step 4: Adjustable Shelf Installation
C
BB
