Model # SPCA-GDH
Please call for replacement parts or assistance:
1-866-942-5362
Whalen Furniture Mfg., Inc.
Page 12
Factory No. 16015
Assembly Instructions
23.
Insert the Shelf Pins (8) into the desired holes on the Side Panels. Make sure you place the four Shelf
Pins in the same level so the shelf is not tilted. Tilt and rest the Adjustable Shelves (M) onto the Shelf
Pins (8) with the finished edge face front of the unit. Make sure that the end notches of the Shelf fit onto
the Shelf Pins properly. As shown.
24.
Plug Cam Lock Covers (10) onto the visible Cams Locks to conceal the Cams.
25.
With the help of your assistant, carefully position assembled Hutch on the top of the desk to prevent
scratching. Make sure it is centered properly and back ends are even with each other.
26.
Using the Metal Bracket (9) as a template, mark the mounting hole locations at the back side of the Desk
and Hutch
Side Panels
, as shown below. With an electric drill and 1/16” drill bit (not included), carefully
drill into the marked location about 1/2” deep. Make sure that you will not crack the side edges.
27.
To secure the units in place, attach the Metal Brackets (9) over the drilled holes using four 5/8” Screws (6)
per Metal Bracket. Tightly fasten all the screws with a Phillips screwdriver.
E
C
