Whalen Emily Full over Twin Loft Bunk Bed with Bookshelf Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 28

Whalen Emily Full over Twin Loft Bunk Bed with Bookshelf Скачать руководство пользователя страница 6

6

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.

YF- Bookshelf Middle Upper Shelf YG- Bookshelf Top Shelf YH- Bookshelf Back Panel
(Qty. 1)

(Qty. 1)

(Qty. 2)

(1) Ø1/4” x 110 mm Bolt (2) Ø1/4” x 45 mm Bolt

(Qty. 24+1 extra) (Qty. 8+1 extra)

(3) Ø1/4” x 38 mm Bolt (4) Ø1/4” x 32 mm Bolt

(Qty. 2+1 extra) (Qty. 20+1 extra)

(5) Ø6.5 mm x 100 mm Tapping Bolt (6) Ø6.5 mm x 48 mm Tapping Bolt

(Qty. 24+1 extra) (Qty. 34+1 extra)

(7) Ø10 x 50 mm Wood Dowel (8) Ø8 x 30 mm Wood Dowel (9) Ø4 mm x 35 mm Screw
(Qty. 54+2 extra)

(Qty. 20+1 extra) (Qty. 40+2 extra)

       (10) Ø4 mm x 30 mm Screw                        (11) Bed Connector Pin                         (12) Barrel Nut
                (Qty. 6+1 extra)                                               (Qty. 4)                                      (Qty. 24+1 extra)

(13) Ø4 mm x 19 mm Screw L-shaped Allen Wrench T-Handle Allen Wrench

(Qty. 2+1 extra) (Qty. 1)

(Qty. 1)

Tools required: Allen wrench (provided) and Phillips screwdriver (not provided).

«
...
4
5
6
7
8
...
»

Содержание Emily Full over Twin Loft Bunk Bed with Bookshelf





























Отзывы:

Нет отзывов