4
E
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Lay the Side Panels (B) on a level and protected surface with the pre-drilled holes facing up. Screw 2
Cam Bolts (EE) into the plastic bushings included on the center of each Side Panel. Fully tighten with a
Phillips screwdriver.
3. Insert 4 Small Wood Dowels (GG) half way into the pre-drilled holes on the Large Divider Panel (C) by
tapping lightly with a rubber mallet, if necessary. Position 2 Small Divider Panels (E) onto the inserted
Wood Dowels and press them together.
EE
B
B
C
E
GG
E
C
E
E
