
11
Assembly Instructions
Tools required: Phillips screwdriver, stud finder, pencil, tape measure, power drill and 1/8” drill bit.
18.
Ask for assistance to position the assembled unit at the desired location against a wall.
19.
Follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach
the tip-over restraints to the unit and the wall.
NOTE
: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously
injured by tipping furniture. You must install the Tipping Restraint Hardware with the unit to
prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended only
as a deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not
earthquake restraints. If you wish to add the extra security of earthquake restraints, they must be
purchased and installed separately.
20.
The unit is now ready for use.
1
2
3
4
4a
Wall
Wall
Long screw
Short screw
Metal bracket
Connector
Steel cable
Wall
Wooden stud