
16
Assembly Instructions
31.
Plug Cam Lock Covers (15) onto the visible Cams Locks to conceal the cams.
32.
Stick the Rubber Bumpers (16) on the outer corners of the Doors (P) where they meet the partition panels.
33.
Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening.
DO
NOT
drag the insert across the Bottom Panel (C) as it may scratch the unit.
34.
Use the pilot holes as a guide, fasten two L-shaped Metal Brackets (10) onto the Firebox Support (O) with
four 15 mm Pan Head Screws (7) Make sure that the right angle is flush with the short edge of Firebox
Support (O).
35.
Use the pilot holes as a guide, fasten the Firebox Support (O) between the Partiton Panels (F and G) with
four 15 mm Pan Head Screws (7).
E
A
E
A
7
O
O
F
/G
7
O
10
C
A
D
15
16
16