• Ensure that the electric supply to the shower is turned
OFF.
Then turn the dial on the shower to
FULL COLD.
3. Shower set up
2. Transformer set up
• Switch the mains electric supply to the transformer
ON
and wait to hear the audible beep from the transformer.
The light on the transformer will now flash red to indicate
that a Bluetooth
®
connection has not yet been established.
• Press and HOLD the blue test button on the transformer
until the light flashes red and green to indicate that the
transformer is now in pairing mode.
NOTE:
You now have 120 seconds to pair the transformer
to the shower.
• Switch the mains electric supply to the shower
ON,
Start/Stop
button will illuminate.
• Within
10
seconds press and HOLD the Start/Stop button on
the shower until the Start/Stop light on the black button goes off.
4. Configuring the shower
BLUETOOTH MINI A5 (2018):Layout 1 27/03/2018 14:57 Page 4
