IN
S
T
A
L
L
A
T
IO
N I
N
S
T
R
U
C
T
IO
N
S
OEM Installation of the WFCO WF-6800 Series
Deckmount Converter
Select a mounting location near the shore power and battery (batteries).
- Do not mount in an area where the owner may store items, as this
could reduce the clearance requirements, obstruct ventilation
openings and affect the efficient operation of the converter.
- Horizontal mounting of the 6800 series is recommended although it
can be mounted in any position that provides unobstructed ventilation
for the fan and vent holes. Secure the converter firmly to the mounting
surface using standard fasteners. For propper operation the converter
must be grounded to the chassis or frame. A ground lug is provided on
the side of the converter.
- Select a mounting location that is appropriate to prevent excessive
heat, water, moisture, dust and dirt entering the unit installed. Allow
a minimum of two cubic feet of clear airspace and any additional
venting as necessary to prevent the unit from overheating.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE ONLY WITH THE SAME TYPE AND RATING FUSE.
The fuse rating that the manufacturer suggests for the output fuses
will be marked on the unit. Replace only with same type and rating.
During the manufacturing process, be sure that all converter openings
are protected from debris falling into the unit.
NOTE:
If the reverse battery protection fuses are blown during
installation, be sure that the battery has been connected properly, then
replace the fuses with “ATC-style” fuse with the same rating as the
original.
WARNING
!
!
CAUTION
!
!
This equipment employs components that tend to produce arcs or sparks.
To prevent fire or explosion,
DO NOT INSTALL IN COMPARTMENT CONTAINING
BATTERIES OR FLAMMABLE MATERIALS (LP gas)
.
2
3
S
P
E
C
IF
IC
A
T
IO
N
S
E
D
POS+
NEG-
FUSE
FUSE
FUSE
WF-6800 Series Converter Dimensions
A:
13.36?
B:
7.87
C
1
:
2.56
D
: 9.96?
E
: 3.89?
?
?
C
2
:
2.93?
A
B
Dimensions
C
2
C
1
REVERSE POLARITY
FUSES USED:
WF-68100 - 40/40/40 Amps
20A Power Cord
