B E L 1 8 0 S E M I - A U T O M A T I C R A N D O M T A P E S E A L E R
2
Introduction
The BEL 180 is capable of applying pressure-sensitive tape to both the top and bottom of various
size cases presented to the machine at random or without manual adjustment between sizes. In
addition, the machine features the ability to use the random function to automatically adjust to a
uniform case size and lock itself in position for longer runs of a single case size.
The features of the BEL 180 are:
DEKKA CADET - 2” high performance tape heads
A special sensor system that activates the dynamic case height adjustment while eliminating a
potential pinch point. Moving parts are concealed by design and by guarding to a high
standard of safety
A stainless steel controls enclosure with logic controller and a second conveniently placed
start/stop switch at the front of the top tapehead holder. There is a solenoid valve as well as a
manual valve for compressed air supply.
Roller infeed section for easier case entry
A robust vertical actuator system for moving the top drive and tape head. It uses air cylinders
with pneumatic rod locks to secure the random case size adjustments, lock the machine in
position for uniform case sizes in ‘Lock’ mode and for safety to prevent unexpected
movement in the case of a sudden electrical or pneumatic power failure.
A tilt-up bottom tapehead holder for easier access to replace the tape roll or remove the
bottom tapehead from the machine.
Heavy duty stainless steel frame.
Interlocked enclosure guard doors.
Standard Specifications:
Length
Width
Height
Case Size Range
Minimum
6” / 152mm
6” / 152mm
6” / 152mm
Maximum
72” / 1829mm*
17” / 432mm
19” / 483mm
*can be made longer
Machine Dimensions
46” / 1175mm
36” / 889mm
54” / 1372mm
In/Outfeed Height
Frame
23.5” / 597mm
With adjustable leg extensions
[foot pad]
Minimum
Maximum
23.5" / 597mm
30” / 762mm
Speed
Up to 10 cases / min.
Shipping Weight
Approx.
500 lbs. / 227 kg.
For further detail, see Layout Drawing 75-678
65-34-5 4/21/10
