ST-1100
Link: https://help.wextelematics.com/installation-guide/st-1100/ Last Updated: January 23rd, 2017
Copyright ©2021 Wex Telematics
Page 5 of 6
(studded bracket B).
With the mounting plates sitting on top of the studded brackets, reattach the brackets to the
3.
device.
Position the device on the mounting surface.
4.
Inspect the area directly underneath each eyelet to prevent damage from the self-tapping screws.
5.
Use the mounting plate eyelets as guides, drill two pilot holes.
6.
Secure the device to the mounting surface using the two 5/16″ (8mm) self-tapping screws.
7.
4. Verify the installation.
To activate your device, with your registration card in hand, use the Wex Telematics
smart phone (
). If you have any verification questions, please call 866-666-5061.
