Description of indicator function
Mode indicator LED1: Blue
1. Off: Full following mode (default)
2. Flash: Yaw axis left/right following mode
3. On: Lens locked mode
Status indicator LED2 status indicator (RGB full color)
1. Blue: Flash (stabilizer receives instruction being executed)
2. Green: Normal working status
3. Yellow: System operation is normal
When the stabilizer isn’t working normally or reports error, the status indicator turns yellow.
When the stabilizer is running overload, the status indicator flashes red and yellow alternatively.
Display of power-on indicator: The indicator stays blue when the On/Off button is pressed
and held; release the button when the indicator flashes blue; the stabilizer is reset to the
initial position when it is turned on and the indictor stays green, indicating that the running
is normal.
Judgment of power-on exception:
1.Blue indicator is off, digital tube doesn’t show battery status, battery voltage is too
low; charge in time;
2.Blue indicator flashes, green indicator is off, tilt axis is stuck; manually adjust the tilt
axis to initial position; or adjust the knob to avoid stuck.
3.Instable after power-on and battery power is 5% (it is recommended to charge in time
when the battery power is less than 10%)
