P. 5
installation guide
Use the 4 levelers supplied to ensure the tub is level. The 4 levelers
must touch the ground to ensure the tub will not shift or move.
When adjusting the levelers, allow a slight clearance (1/8”)
between the finished floor and the apron.
Note:
Use a level to ensure accuracy.
5
Connect the bathtub drain to the floor drain. Hook up the water to the faucet.
Check that all
connections are waterproof.
6
Do a silicone joint pressure seal between the apron of the bathtub and the floor.
The sealer
absolutely must penetrate thoroughly beneath the rim of the apron.
This will ensure that no
water seeps
underneath the bathtub, while also
supporting
the tub’s apron.
7
6
7
Soft-touch pop-up drain, for built-in
overflow. Fits both 1-3/4” tubular brass.
1-1/2” ABS Direct vertical drain waste fitting
(copper/brass option also available).
1-1/2” ABS 90º Elbow drain waste fitting
(copper/brass option also available).
IMPORTANT:
for models
BBE 01, BBE02, BC 0401, BC 0801, BC 0802, BC 0803, BCL 01, BCLB
01, BCR 01, BOV 01-62, BOV 01-66, BST 01, BTP 01, BWA 01, BLB 02 and BMD 01.
The faucet
cannot be installed on the bathtub. It must be mounted to the wall or to the floor. Read
the manufacturer’s instructions for installation details.
Plug & Bathe connection system with slot design overflow and soft toe touch drain.
The built-in overflow is pre-installed by WETSTYLE.
Valid for all bathtubs with Plug & Bathe Connection system with slot design overflow and soft toe drain.
View of bathtub’s underside
!
!
ATTENTION:
The drain on the bathtub model
BWA 01, BST 01, BCL 01, BCLB 01
,
BC 0801, BC 11, BC 12
and
BC 14
is
positioned lower than the tub base. To avoid damaging the pipes: plan for the necessary free space underneath the
floor before installing the bathtub.
WETSTYLE Plug & Bathe
overflow and
drain connection system includes:
TM
TM
TM
Montréal - Canada | 1-888-536-9001 | www.wetstyle.com | November 2019
