WETJET WJ85.403.014, Руководство пользователя

Страница: 7 / 20

7
WARNING
Nozzle has been set according to factory set alignment.
Operating
Never reach under the unit while the high-pressure cleaner is operating
•
Never direct the 14" Surface Cleaner at humans or animals.
•
Do not operate on a ladder.
During operation, should you experience a buildup of small stones or other
foreign material within the cover, we recommend that you simply tip the cleaner
on its side at 45° which should expel any foreign materials. This will extend
the life of your tips and rotary arm. The tips that have been installed on your
surface cleaning system permit the use of your cleaner with a pressure washer
producing up to 4 GPM at 4000 PSI. This unit will not spin efficiently with
water flow under 2.0 GPM. Periodically check the tips to ensure they are not
plugged by dirt particles. It is very important when operating your 14” Surface
Cleaner, that you maintain a continuous motion.
Should you leave the cleaner in a stationary position, the surface being cleaned
can be seriously damaged by the high pressure.
Recommended Applications
Attach to a gun and lance
Connect to lance using q/c fittings on the lance and 14" Surface Cleaner. Clean
hard surfaces on ground or wall.
For 4GPM, use #020 nozzle (Sold separately)
Part # 85.225.020BEP2
OPERATING