THE DT39
2
/39
2
i
6
7
Bluetooth
The DT39
2
/39
2
i features a built-in Bluetooth adapter that operates on the
Microsoft Windows Bluetooth protocol. The Bluetooth configuration application is
invoked from the System Tray or from the Control Panel for Windows XP. Follow
the instructions and options provided within the application to configure and invoke
Bluetooth connectivity with the corresponding peripherals.
NOTE:
Bluetooth devices or accessories that are not compatible with the Microsoft
Windows Bluetooth protocol may not work with the DT39
2
/39
2
i.
Button Management
Where supported by software, many of the hard buttons on the DT39
2
/39
2
i are
programmable to perform a function of the user’s choice. The exception is the Power
Button and the SAS Button. To activate the button re-assignment application, invoke
the Button Agent application, e.g., in Windows XP Embedded.
Brightness Control
Where supported by device firmware and software, a hard button may be engaged to
manipulate the display brightness. Press the System Menu button (Button 7) on the
front of the DT39
2
/39
2
i. The System screen will display a Brightness control
section with up and down arrows that can be activated with the stylus.
Battery and Power Management
The DT39
2
/ 39
2
i is equipped with an internal 3760mAh Li-Ion battery pack that
is capable of supporting approximately 3 - 4 hours of continuous operation. With the
internal battery and an external battery pack that clips (hot-pluggable) onto the back
of the device, the maximum period of continuous operation will be approximately 6 - 8
hours. The period between battery recharges can be significantly lengthened by putting
the device into Standby mode through the Power Button (see Buttons Function Table)
whenever the device is not in use. Depending on the operating software, the DT
39
2
/39
2
i may also be configured to enter various power-saving modes via the Power
Button or through timed entry.
Desktop Cradle
The DT 39
2
/39
2
i is complemented by an optional Desktop Cradle for support,
pass-through charging, and connection to a range of USB peripherals, including
keyboard and mouse. The Cradle offers the following interfaces: a DC-in port for the
AC-DC adapter, an Ethernet port, and USB ports. Always seat the DT39
2
/39
2
i
securely onto the cradle. The cradle must be powered by the AC-DC adapter for
the Ethernet and USB ports to function. The battery packs on the DT39
2
/39
2
i
may be recharged by connecting the AC-DC adapter directly to the DC-in port on the
DT39
2
/39
2
i or through the DC-in port on the Desktop Cradle while the DT
392/392i
is docked to the Cradle.
USING THE DT39
2
/39
2
i
Memory & Storage configuration
The DT39
2
/39
2
i is available with 1GB or 2GB memory configurations. Storage
options currently range from: 2GB to 16GB flash memory or 32GB to 64GB SSD.
Peripherals Support
Through its USB ports, the DT39
2
/39
2
i supports a wide range of USB-based
peripherals. These peripherals are applicable for software installation, applications
storage, data storage, and system software recovery and updates. The DT39
2
/
39
2
i is also compatible with custom mountable cradle options. These securable and
mountable cradles provide an interface to VESA mounts and arms, and to ports that
may include USB, Ethernet and pass-through power.
WETIF Industrie EDV
Telefon DE
+49 8142 448976-0
Senserstraße 3
Telefon AT
+43 664 28 68 223
D - 82140 Olching
[email protected] www.wetif.com
Techn. Änderungen ohne Vorankündigung und Irrtum vorbehalten. Alle Rechte geschützt.
