12
Set-up and Operation
Mounting
The most important thing when mounting the spotlight with solar
panel and motion sensor is to be aware that it requires
direct
sunlight
. The more direct sunlight the solar module receives, the
longer the spotlight will operate.
1. For installing the main unit, use the included screws or other
suitable screws and wall plugs depending on the consistency
of the surface.
2. Unscrew the wing screw on one side and also unscrew the
wing screws at the respective joint of both spotlights and
adjust the position of the bracket and the spotlights. Afterwards
hand tight the wing screws.
Start-up
1. Set the ON/OFF switch (4) to the position
ON
. If the built-in
battery is fully charged and as soon as motion is detected, the
spotlights will light up in darkness.
The position OFF is used for storing, shipping and non-use for
extended period of time. In the position OFF the built-in bat-
tery is not charged.
2. Test the coverage of the area by walking slowly around the
area and re-adjust the position of the unit, if necessary.
Hints: the mounting bracket can be adjusted only vertically.
The spotlights can be adjusted only horizontally.
Motion Sensor
The motion sensor is equipped with a build-in twilight sensor.
Point the motion sensor towards the area in which you want to
detect motion.
Hint: Please keep in mind that the motion sensor does not detect
directly oncoming movement very well.
