12
Using
Inserting/Replacing the Batteries
The headlamp is powered by two batteries of the
type LR03 (AAA). The battery compartment is
located at the rear side of the lamp. Replace the
batteries when the light gets weaker.
1. Open the battery compart-
ment and insert two new
batteries of the type LR03
into the battery compart-
ment. Pay attention to the
proper polarity of the bat-
teries. The polarity is print-
ed inside the battery com-
partment.
2. Close the battery compartment again.
Using
1. Push the button several times to turn on and off
the lamp with the white LED and to cycle
through the four operation modes in the follow-
ing sequence with the brightness:
5
0 % → 100 % → 30 % → Flashing → OFF
2. Keep the button on top of the headlamp pressed
for some seconds to turn on the mode with the
red LEDs. Push the button several times in or-
