Using
IX
Inserting/Replacing the Batteries
1. The battery compartment of the LED lantern is located
at the bottom side of the lantern’s housing. Briefly turn
the bottom plate of the LED lantern counter clockwise
and remove it from the housing.
2. Insert three new batteries of the type LR6 (AA) into the
battery compartment. Pay attention to the proper polari-
ty of the batteries. The polarity is printed inside the
battery compartment.
3. Reinstall the bottom plate on the bottom side of the LED
lantern and turn it clockwise to fix it. Apply a little force
to lock it in Place.
Replace all three batteries when the light of the LEDs
shines weakly or if it does not shine at all.
Operation
Press the on/off button on the top of the LED lantern to
switch on one light rod, press the button again to turn on
another rod until all rods have been turned on by repeated
pressing. Press the button once more to set the lantern to
flash mode. Pressing the button again turns the lamp off.