Wetelux 81 61 76, Инструкция по эксплуатации

Страница: 14 / 19

9
Using
Installation
ƒ Press the unlocking key (2) to open the
two parts of the LED light.
ƒ Place the LED light, as pictured on the
right, in the desired height around the pole
of the umbrella. Re-connect both parts of
the LED light. Make sure the unlocking
key audibly snaps in. The clamping brack-
ets securely keep the LED light in this po-
sition.
ƒ For mounting on thin poles, use the sup-
plied adhesive rubber spacers, if neces-
sary.
ƒ If you want to change the mounting height
later, simply press the unlocking key and
move the LED light to the desired position.
ƒ Tilt the light heads (1) in an angle of max.
30° to the desired direction. Do not use
force when adjusting the light heads in or-
der not to damage the device.
Switching On/Off and Dimming
ƒ Press the On/Off key (4) once to switch on the LED light with full
brightness.
ƒ Press and hold the On/Off key (4). The LED light slowly turns
darker respectively brighter. Release the key when the desired
brightness has been accomplished.
ƒ Press the On/Off key one more time to switch of the LED light.