Wetekom 81 85 13, Инструкция по эксплуатации

Страница: 26 / 38

22
Operation
Countdown Setting
The countdown timer can be set for a time of up to 23 hours, 59 minutes
und 59 seconds.
Please consider the following while setting the timer: Use the programme
button
← or → to choose between “ON“ and “OFF“.
“ON“ means that the electricity and therefore also the plugged-in
appliance are turned on. It will turn off after the set-time.
“OFF“ means that the electricity and the plugged-in appliance are turned
off. After the set-time it will turn on.
Example: Your lamp shall be turned off after 1
hour and 10 minutes.
When the time is shown, press the button
PROGRAMM
← several times, until the icon
“PROG CD“ appears on the display.
1. Press the button STELLEN to set the desired countdown time. The
display shows “SET“ and at the same time “ON“ (f) is flashing. Use the
button
← or → to choose between “ON“ or “OFF“.
2. Choose “ON“ and press the button STELLEN. Now the hour display
starts flashing. Press the button ← or → until “1“ appears.
3. Now press the button STELLEN. Do the
same when setting hours and minutes. The
countdown can now be activated by pushing
the button CD. Now the icon CD flashes on
the display.
After activating, the lamp it will be turned off after 1 hour and 10
minutes.
4. Now press both buttons ← → simultaneously, to display the current
time.
The countdown function remains active. It is indicated by the flashing
“CD” icon.
5. To deactivate the countdown function, press the button CD again. The
icon “CD“ disappears. The countdown settings will be saved until you
enter new settings.