- DECO VANITY INSTALL GUIDE -
(2018-12-04)
4/14
DECO vanities require special wall preparation prior to installation of the unit.
Wall Preparation
1.1
Make sure that walls and floor are straight and level.
1.2
Determine overall vanity dimensions.
1.3
Determine the desired location of the vanity.
1.4
The distance between studs should not be more than 16".
1.5
Metal studs should be reinforced vertically by 2" x 4" wooden studs.
1.6
Metal and wooden studs should be reinforced horizontally with 2" x 6" wooden
studs at anchoring heights:
• 29-3/16" along the full width of the vanity
1.7
Do not apply the product to the wall surface until all braces and mounting clips
have been installed and all plumbing has been completed.
Vanity: 34-1/2” from floor (Floor
mounted)
Z-clip height: 31-5/16”
Z-clip anchor height: 29-3/16”
(Stud center line)
* See diagram on page 4
29-3/16”
Anchor height
(Stud center line)
