WIRING
WET SOUNDS
Marine subwoofers are offered in Dual Voice Coil configuration 2+2 and 4+4 ohms. Voice coils can be wired
in parallel (Z = 1or 2 ohms) or in series (Z = 4 or 8 ohms), allowing the user to properly match the driver to the amplifier.
2+2 ohms
XS-10FA SW-10FA
XS-12
XS-10FA SW-10FA
XS-12
4+4 ohms
Parallel Z = 1 Ohm
Parallel Z = 2 Ohms
SS-10B
2 ohms
2 ohms
Series Z = 4 Ohms
2 ohms
2 ohms
Parallel Z = 1 Ohm
Series Z = 4 Ohms
Series Z = 8 Ohms
The Wet Sounds subwoofers are a line of advanced low frequency transducers. These subwoofers use advanced materials throughout such as our
exclusive rubber spider, composite cones and thermoformed rubber surrounds. Wet Sounds has developed an exclusive rubber spider for our subwoofers
which is used for the spider as most marine speakers use cloth that will deteriorate over time. These subwoofers are built to last in the harshest environments.
The XS/WS subwoofers utilize a cast aluminum frame that is powder coated to provide a solid non flexing mount. Advanced acoustical technologies like
perimeter venting, high temperature voice coils also help to make these the most advanced marine subwoofers on the market.
DIMENSIONS mm(”)
SS-10B
0.21” (5.5mm)
9.68” (246mm)
10.12” (257mm)
o
o
o
6.30”(160mm)
9.21”(234mm)
5.27”
(134mm)
6mm
0.24”
o
o
XS-12
4.92”
(125mm)
1
1.22”(285mm)
7.36”(187mm)
20mm
0.78”
o
o
0.27” (7mm)
12.6” (320mm)
11.8” (300mm)
o
o
o
6.49”(165mm)
9.37”(238mm)
4.72”
(120mm)
36mm
1.42”
o
o
10.07” (256mm)
0.21” (5.5mm)
11.02” (280mm)
o
o
o
XS-10FA
SW-10FA
4.72”
(120mm)
6.49”(165mm)
9.37”(238mm)
36mm
1.42”
o
o
10.07” (256mm)
0.21” (5.5mm)
11.02” (280mm)
o
o
o
