Factory Reseting the Soundbar
When switching a soundbar from secondary to primary, both primary and
secondary soundbars need separate media device connections. Meaning, the
secondary device must have been connected through Bluetooth
®
to another
device prior to entering broadcast mode.
If replacing a previously paired remote, the soundbar needs a factory reset to
forget the previous remote.
Paring a new wireless remote:
Paring after factory reseting the soundbar:
Note:
The wireless remote will need to be re-paired after factory reset.
Change Primary soundbar:
Pause the audio on the primary soundbar.
1.
Begin playing audio on the secondary soundbar from the media device
connected to it.
2.
The primary soundbar, and all others synced, will now play the audio from that
secondary soundbar making it the new primary soundbar.
3.
Factory reset the soundbar by very long pressing the Volume down and Play/
Pause buttons simultaneously for 8-10 sec on the Stealth XT control panel.
1.
Remote Paring Instructions
Factory reset the soundbar by very long pressing the Volume down and Play/
Pause buttons simultaneously for 8-10 sec on the Stealth XT control panel.
1.
The RGB lights will flash, and the soundbar will turn off.
2.
The RGB lights will flash, and the soundbar will turn off.
2.
Turn the soundbar back on and wait for the icon to flash
blue
.
3.
The soundbar has now been factory reset.
3.
Very long press the Volume down and up buttons on the remote for 8-10 sec
until the RGB lights flash on the soundbar. The remote is now paired.
4.
Very long press the Volume down and up buttons on the remote for 8-10 sec
until the RGB lights flash on the soundbar. The remote is now paired.
1.
Wet Sounds Stealth XT Soundbar Owner’s Manual
12
