w e t s o u n d s
a link
plus
owner’s manual
rev 1.0
Thank You for purchasing the
Wet Sounds
a link
plus
kit!
Wet Sounds products represent the ultimate
in high performance, element-proof audio.
Wet Sounds products are specifically
designed and engineered to withstand the
rigorous marine and outdoor environments.
The Wet Sounds
a link
plus
is a wireless
audio link that allows broadcasting from one
audio system to another. Each
a link
plus
can be set to either send or receive audio as
needed.
Up to four (4)
a link
plus
units can be
bonded to receive the same audio from one
(1) broadcasting
a link
plus
, allowing for a
shared experience through multiple audio
systems.
Please take a moment to look over this
owners manual before enjoying the product.
Congratulations!
controls / indicators
Power Button
Status LED
Bond LED
Battery LED
Bond Button
Volume Down
Volume Up
RED
•Transmit Mode
GREEN
•Receive Mode
Power ON
Hold 1 sec
Power OFF
Hold until LEDs go off
Switch Modes
(Transmit/Receive)
Tap once while ON
Orange Flashing
(1 sec on, 1 sec off)
•Low Battery
Orange Flashing Burst
(3 quick flashes)
•Critically Low Battery
Orange Solid
•Charging
Add / Delete Favorite
Hold a few seconds
Rotate thru Favorites
Click one (1) time
Enter Explore Mode
Click two (2) times
Multi-Color - See
essential functions
page for more info.
3.5mm aux cable
3.5mm aux y-cable
Transmitter
Receiver
connection harness
(audio system)
phone or other
audio source
(audio system)
red 3.5mm
(female)
black 3.5mm
(female)
micro USB charge
connector (female)
connectors / cables
