Page 3
Safety
Congratulations on the purchase of your new Westwood
Garden Tractor.
This is a highly versatile machine, built to the highest
engineering standards to operate in a wide range of
conditions.
To get the most out of your machine spend a little
time going through this Manual. It will pay dividends.
International Symbols
Warning!
General Hazard -
Safety Alert
Read Instruction
Manual before
using your
machine
Disconnect
Spark Plugs
before carrying
out maintenance
Beware of objects
thrown out by
the cutter blade
Keep
bystanders clear
Keep hands and
feet away from
cutter blade
You’ll find these International Symbols on your Tractor.
Please take notice of them, they are there for your safety.
Safety Instructions
Read the instructions carefully – get to know the controls,
and learn how to stop the engine in an emergency.
If you stick to these sensible rules, you’ll avoid the risk of
injury and make sure your machine has a long and hard-
working life. If you are not clear about anything in the
following pages, contact your dealer for advice.
Wherever you see this symbol, either in the
Manual or on your Tractor, it means special
care must be taken to avoid a hazard to the
driver or bystanders.
NEVER
allow the machine to be used by
children, or any person unfamiliar with the
controls – particularly the Foot Brake.
ALWAYS
remember that the user is
responsible for accidents or hazards to
other people and their property.
ALWAYS
remember – on Multi Bladed
Machines, rotating one Blade can cause
the others to move. Take care.
ALWAYS
make sure the machine is in a
safe condition to operate – and never use it
unless the Guards provided are correctly
fitted.
ALWAYS
check nuts and bolts for tightness
and lubricate moving pivoting points.
ALWAYS
make sure the
Cutter and Power
Take-off drives are disengaged
before
starting the engine. This is a safety
measure.
NEVER
run the engine in a confined space
where dangerous Carbon Monoxide
exhaust fumes can collect.
NEVER
try to change the governor setting
of your engine – it has been set for
optimum performance.
ALWAYS
stop the engine and disengage
the PTO Drive before refuelling and before
removing the Grass-Collector Box.
ALWAYS
disengage the PTO Drive from
the attachment when transporting or not in
use.
ALWAYS
inspect the Blades, Blade Bolts
and Cutter Assembly for wear or damage
before you use your machine. Replace any
worn or damaged blades or bolts with
genuine Westwood spare parts.
The Tractor
ALWAYS
stop the Engine, remove the
Ignition Key and disconnect the Spark Plug
Leads before doing any of the following:
✔
Checking, cleaning or working on
the Cutter Unit.
✔
Working on any Drive Belt System.
✔
Inspecting the Cutter Unit for
damage after striking an object.
✔
Making repairs.
ALWAYS
check immediately if the machine
starts to vibrate abnormally.
ALWAYS
use genuine Westwood spare
parts.
Page 22
Specifications (S & T Series)
0.93m (Excluding deck)
1.88m
2.88m
Weight
S1300/36
239 kg
S1300H/36
239 kg
S1400H/38
241 kg
S1600H/38
242 kg
T1600H/38
242 kg
T1600H/42
259 kg
T1800H/48
259 kg
PGC
59 kg
Fuel Tank Capacity
7 litres (1.5 gallons)
PGC Capacity
300 litres
Transmission
Tuff Torq K46 Hydrostatic
Turning Radius
63.5cm
Forward Speed
5.3 mph
Tyre Pressures
Front: 0.8-1.1 KGF/cm (12-16 psi)
Rear: 0.7-1.1 KGF/cm (10-12 psi)
1.17m
Model
Engine
Displacement
Power
Torque
Bore
Stroke
S1300M/H
12.5hp Briggs & Stratton
I/C Single Cylinder
465cc
9.4kw (12.5hp)
24.1NM
@2600rpm
87.3mm 77.7mm
S1400H
14.5hp Briggs & Stratton
I/C Single Cylinder
465cc
10.7kw (14.5hp)
24.5NM
@2600rpm
87.3mm 77.1mm
S1600H
15.5hp Briggs & Stratton
I/C Single Cylinder
465cc
11.5kw (15.5hp)
30NM
@2600rpm
87.3mm 77.7mm
T1600H
16hp Briggs & Stratton
INTEK V-Twin OHV
480cc
11.8kw (16hp)
36.5NM
@2600rpm
75.4mm
70mm
T1800H
18hp Briggs & Stratton
INTEK V-Twin OHV
656cc
13.4kw (18hp)
44.1NM
@2600rpm
75.4mm
70mm