Gettin
G
St
arted
Safety
/
Specifica
tion
S
aSS
embl
y /
in
St
alla
tion
o
pera
tion
trouble
Shootin
G
m
aintenance /
r
ep
air
OPERATING INSTRUCTIONS
4
Cartridge Loading
Bulk Loading
Remove the gun head by rotating it in counter-clockwise direction.
Pull the Plunger Rod Handle all the way
back and lock it.
Fill the barrel with grease using a scoop
Remove the plastic cap from the
cartridge and insert the open end of the
cartridge into the grease gun barrel until
the rim of the pull-tab end meets the rim
of the barrel. Now remove the pull-tab
seal. Screw back the grease gun head
tightly onto the barrel.
When the barrel is completely filled with
grease, shake the grease gun barrel to
allow the grease to settle down. Then
screw back the grease gun head tightly
onto the barrel.
Prime the grease gun
Release the plunger rod while keeping head assembly open by 2 turns, move
plunger rod back and forth 2-3 times to force out any trapped air. Exert force on the
grease using the plunger handle till the grease oozes out of the head and barrel
interface. Tighten the head and start operating the lever handle of the gun. If the
grease comes out of the coupler smoothly, then the gun is primed. If not, repeat the
priming procedure.
