6
STORAGE
See the instructions for "Engine Storage" in the Engine Manual.
Lubricate grass collection door hinge pins and latch with WD-40 or similar lubricant.
Grease all bearings and bushings.
NOTE:
Never store Lawnkeeper with clippings in the drum.
TROUBLESHOOTING
For problems relating to the engine, refer to the enclosed Engine Manual.
The following Troubleshooting Chart is provided for quick diagnosis of problems that may arise during the life of the
Lawnkeeper. However, it is impossible to anticipate every situation in which a problem can occur.
Contact your dealer for any problem not covered in this manual and Troubleshooting Chart.
TROUBLESHOOTING CHART
CHART
SYMPTOM
POSSIBLE CAUSE
REMEDY
Brush does not turn when engine is running
Broken or loose drive belt Replace belt. See “Brush Drive Belt
Replacement and Parts List”
Lawnkeeper drum does not fill properly
Engine not running at
proper speed (3400 to
3600 RPM)
Open throttle or adjust engine speed.
See “Engine Manual”
Front caster wheel is set
too low causing the brush
to stall.
Adjust caster wheel. See “Adjusting
Brush Height” (Caster Wheel)
Drive belt is slipping
Adjust belt. See “Tightening the Brush
Drive Belt”
Brushes are worn out
Replace brush strips. See “Brush Drive
Replacement”
Offset tongue will not stay locked in place
Improper placement of
clamp
Adjust clamp. See “Offset Tongue
Adjustment”
