6
31CE52
Westward Operating Instructions and Parts Manual
Rolling Cabinet
12.Slide (J) onto (L) and (M), so (P) fits
into slot on (J).
13. Align slots in (L) and (M) with holes in (G)
and (H), and attach with (4) M6*12 hex bolt.
14.Attach (2)M6*12 hex bolt to (K). Leave enough gap
to allow (R) to hang from the hex bolt.
Note: Plastic Hood not shown for clarify.
Attach (R) to the hex bolt. Slide (R) over to hook into
place.
15. Attach (N) (4) where desired.
1. To reinstall the light bulb, line up the pins of
the bulb with the holes on the light fixture, roll it
inwards firstly, then to secure it in place.
2. To reinstall the lampshade, push it inwards
slowly, then to secure it in place.
Handle them in the opposite direction when
uninstall the bulb and lampshade.
