Westunitis InfoLinker3, Руководство по введению

Страница: 26 / 48

24
„
IL3 Dedicated Bone-Conduction Headphones (sold
separately)
Attach the bone-conduction headphones to the HMD.
1
Insert the bone-conduction headphones into the arm on the camera side or the
arm on the display side of the HMD.
2 Adjust the position and lock the attachment to fix the bone-conduction headphones.
(Up: Lock, Down: Unlock)
Bone-conduction headphones
Strap hole
Attachment lock
Display slide section
View from the side View from the top
3
Place the cable of the bone-conduction headphones along the groove inside the arm.
4
Open the bone-conduction headphone jack cover of the NBC, and connect the cable.
Using the bone-conduction spacer (sold separately)
If the bone-conduction headphones do not fit well, attach the bone-conduction spacer
(large or small).
1
Attach the cap to the bone-conduction spacer.
2
Attach the cap with the bone-conduction spacer to the bone-conduction headphones.
Cap
Bone-conduction
spacer