18
Accessories: NBC Bottom cover
This part is attached to the bottom of the InfoLinker3 (NBC), on the left and right sides,
to ensure safe use of the InfoLinker3.
If this part is removed for cleaning, please install it correctly.
For correct installation, fix the fixing boss to the mounting holes (screw holes) on the
bottom of the NBC as shown in the figure. Make sure there is no wobble after installa
-
tion before use.
CAUTION
If this part is damaged
Please replace it as it may fall off the NBC or cause an acciden due to
the damaged part.
Fixed boss
NBC Bottom Cover
Mounting holes
Charging the batteries
When using this device for the first time or when the battery is exhausted, charge the
battery using the NBC power supply port or the battery charger of the separately sold
accessory.
CAUTION
Do not charge the device when it is wet.
Otherwise, a short circuit will occur, which may cause a fire, malfunc
-
tion, or burns due to an electric shock or heat generation. Only charge
after completely removing the water first.
Charging using the NBC power supply port
1
Open the cover of the NBC power supply port and connect the USB cable sup-
plied with this device to charge.
The status LED lights up and charging starts.
WARNING
Use the USB cable supplied with this device.
If a different USB cable is used, it may cause overheating or ignition.
Power supply port
Status LED
Содержание InfoLinker3
Страница 2: ......
