-4-
-5-
ASSEMBLY INSTRUCTIONS
1. Connect the
Left
and
Right Legs
to the
Base
using the provided
Allen Wrench
and
Screws
.
2. Using an
Allen Wrench
and
Screws
,
attach the
Left
and
Right Legs
to the
Lower
Housing
.
Figure 1
3. Install the
Chute
to the
Top Housing
using an
Allen Wrench
,
Screws.
4. Insert the
Blade Rack Assembly
into
the
Lower Housing
, guiding the
Drive
Shaft
into the bearing journals. Make sure
the teeth of the
Blade Racks
are properly
meshed together.
5. Position the
Top Housing
onto the
Lower
Housing
and line up the screw holes.
6. Secure the
Top Housing
to the
Lower
Housing
using the
Housing Thumbscrews.
DO NOT OVERTIGHTEN!
7. Insert the
Left Comb
and
Right Comb
into the
Top Housing
.
Figure 2
NOTE:
The
Left Comb
is marked with an
“L” on the upper portion of the
Comb
. The
Top Housing
is marked with an “L Comb”
and “R Comb” to aid in
Comb
installation.
8. Install
Handle
onto the
Blade Rack Shaft
.
Secure the
Handle
to
Blade Rack Shaft
with
the
Handle Thumbscrew
.
GENERAL SAFETY RULES
READ AND FULLY UNDERSTAND ALL INSTRUCTIONS
AND WARNINGS PRIOR TO USING THIS PRODUCT.
YOUR SAFETY IS MOST IMPORTANT! FAILURE TO
COMPLY WITH PROCEDURES AND SAFEGUARDS MAY
RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE.
REMEMBER: YOUR PERSONAL SAFETY IS YOUR
RESPONSIBILITY!
WARNING!
SAVE THESE INSTRUCTIONS!
Refer to them often and use them to instruct others.
1.
NEVER REACH INTO
the
Cuber/
Tenderizer
. Doing so could cause serious
injury.
ALWAYS USE THE PROVIDED
TONGS.
2.
KEEP FINGERS CLEAR OF THE BLADES
AT ALL TIMES.
Failure to do so may result in
personal injury. The
Cutting Blades/Blade
Assembly
is very sharp. It is recommended
to wear Kevlar, cut resistant gloves when
handling the
Blades
.
3.
DO NOT
press or push meat into the
Chute
with your fingers or any other object. Doing
so may cause personal injury and/or damage
to the unit.
4.
NEVER
use fingers to scrape food away
from the
Cuber/Tenderizer
while the
grinder
is in operation.
SEVERE INJURY MAY
RESULT.
5.
DO NOT
push the
Tongs
or other utensils
into the
Blades
.
6.
NEVER LEAVE THE Cuber/Tenderizer
UNATTENDED.
Close supervision is
necessary when any appliance is used near
children. This appliance is
NOT
to be used by
children.
7.
NEVER
use any accessories or parts from
other manufacturers. Doing so will VOID YOUR
WARRANTY.
8. Thoroughly clean all parts that will come
into contact with food before using the
Tenderizer/Cuber
. Wash all parts by hand
and dry thoroughly.
WARNING!
Protective/
cut-resistant Kevlar gloves are recommended
when handling the blade assembly.
9.
DO NOT
attempt to tenderize meat with
bones or other hard items. Damage to the
machine will occur.
10.
TIE BACK
loose hair and clothing, and roll
up long sleeves before operating the
Cuber/
Tenderizer
.
REMOVE
ties, rings, watches,
bracelets, or other jewelry before operating the
Cuber/Tenderizer
.
11.
DO NOT
use the
Cuber/Tenderizer
while
under the influence of drugs, medications or
alcohol.
ADDITIONAL ACCESSORIES AVAILABLE
6” Jerky Slicer Blade
07-3302
Food-Grade Silicone Spray
03-0101-W
Kevlar Gloves Small
34-0101
Kevlar Gloves Medium
34-0102
Kevlar Gloves Large
34-0103
Cuber/Tenderizer Motor Attachment
01-0103-W
Pro-2100 Vacuum Sealer
65-0101
Vacuum Sealer Bags Multi Pack
30-0107-W
These products and many more products can be ordered by visiting
w w w . w e s t o n s u p p l y . c o m
or by calling
Pragotrade LLC Toll Free at 1-800-814-4895
Monday thru Friday 8:00am-5:00pm EST.
Outside the U.S. call 440-638-3131
Figure 1
Legs
Lower
Housing
Base
Chute
Top
Housing
Blade Rack
Assembly
Blade Rack
Shaft
Figure 2
Comb
