1. Make sure the Rubber Gasket is
inserted into the underside of the
Hopper. The concave side of the gasket
should be facing up.
FIGURE 1/1A
2. Align the Hopper with the Pit
Container Base, making sure the notch
and slit snap into place.
FIGURE 2/2A
ENGLISH INSTRUCTIONS
4
ASSEMBLY INSTRUCTIONS
CLEANING INSTRUCTIONS
Prior to use, wash all parts in warm soapy water.
NOTE
: SOME parts are dishwasher safe. Please do not put the Spring,
Rubber Gaskets or Pit Container Base in the dishwasher.
CLEANING INSTRUCTIONS
FIGURE 1
FIGURE 1A
FIGURE 2
FIGURE 2A
