•
5
PRODUCT MANUAL
1800 358 101
www.westlab.com.au
+64 9 553 3677
www.westlab.co.nz
646 568 5391
www.westlab.com
1 877 822 1455
www.westlab.com
Australia
New Zealand
United States
Canada
4. Maintenance & Cleaning
•
Always unplug the power adaptor before cleaning the unit.
•
Wear protective gloves and safety glasses while cleaning the unit.
•
In the event of contamination caused by aggressive agents, the unit must be cleaned
immediately using a natural cleaning liquid. If any damage is seen, contact the
service technician.
•
Excessive amounts of liquid should be avoided. Liquids must not contact the motor.
•
After cleaning, ensure that all the parts are dried.
•
If repairs are performed by unauthorised personnel, the product warranty may
become void.
5. Installation
1. Open the packaging and gently remove the disc rotator from the box.
2. Place the unit gently onto a firm and levelled surface.
3. Unpack every individual component.
4. Assemble the components as instructed in this manual for optimal performance.
ATTENTION:
The manual should be kept with the device and all the packaging should be
kept in safe storage for at least two years for warranty purposes.
Location and mounting
Place the disc rotator on a flat, solid, and levelled surface. Ensure that all four feet stand
on the surface firmly. Avoid installing on a slippery surface or a bench prone to vibration.
•
The ideal ambient temperature is 20°C ± 5°C. Do not place the unit in direct sunlight.
•
Keep a minimum clearance of 300mm from all directions to guarantee safe operation.
•
Keep the unit away from heat or water to avoid sample temperature errors.
•
Do not place the disc rotator in an area that makes it difficult to operate the unit.