32
33
CARE AND CLEANING
CARE AND CLEANING
Re-assembling the top door trim
• Take hold of the top door trim at each side and
position it to the inside edge of the glass.
• Push the trim down with its top edge over glass panel
until the clip snaps in on each side of the trim.
•
Push the middle of the trim down to ensure it is
straight and firm against the glass panel.
Re-assembling the bottom trim
(on selected models)
• Push down to “snap” each side of bottom trim back
into door columns.
Re-assembling the door glass panels
• Insert the smaller clear glass panel (when fitted) first
from above and at an angle to the profile of the door.
•
Repeat for the black bordered glass panel ensuring
the painted surface is facing to the downside.
CARE AND CLEANING (CONTINUED)
Cleaning the quad glazed oven door
(on selected models)
WARNING
CAUTION
Do not lift the door by the handle. Rough handling will
cause glass to break.
Removing the oven door
TIPS & INFORMATION
IMPORTANT
Your oven is equipped with a door that can be
disassembled in order to clean all the panes of glass.
Remove the door before cleaning.
• Open the door fully to access the hinges then rotate
the ‘stirrups’ (highlighted in the image) on both
hinges fully to open position.
• Slowly close the oven door until it is stops against the
‘stirrups’ (about 30°).
• Hold the oven door with a hand each side and
remove it from the oven by pulling it towards you.
Fitting the oven door
• Take hold of the oven door with a hand on each side
and with the door at an angle of 45
o
, position the
recesses at the bottom of the door onto the hinge
arms of the oven. Let the door slide down the hinge
arms as far as it will go.
• Open the door fully to access the hinges.
• Rotate the stirrups (see image below) until they lock
into the hook. The oven door may now be closed.
hook stirrup
hook
stirrup
hook
