9
EN
HOW TO USE
Fig. 9
Fig. 10
BASE ASSEMBLY
1. Remove the L-shaped screw and metal washer from the outer
pole (7) by turning the L-shaped screw anti-clockwise.
2. Insert the outer pole (7) into the top of the base (8)
(Fig. 1)
.
3. Insert the base weight and then the metal washer into the
bottom of the base (8), and tighten the L shaped screw
clockwise to secure the assembled parts to the base
(Fig. 2, 3)
.
4. Turn the height adjustment knob (6) clockwise to tighten the
extension pole (5) in the outer pole (7).
MOTOR UNIT AND BASE ASSEMBLY
1. Remove the tilt adjustment knob (4), long screw, small screw
and small knob from the bottom of the motor unit (15).
2. Align the 4 screw holes on the bottom of the motor unit (15)
with the 4 screw holes on the top of the extension pole (5).
3. Insert the long screw through the bottom screw holes and
tighten with the tilt adjustment knob (4)
(Fig. 4, 5)
.
4. Tighten the small screw in the screw hole above the tilt-
adjustment knob (4) by turning clockwise with the screwdriver.
Then tighten the small knob in the remaining screw hole.
(Fig. 6).
FAN HEAD ASSEMBLY
1. Insert the back of the rear guard (13) into the motor shaft (14).
2. Align the 4 screw holes on the rear guard (13) with the 4 screw
holes on the motor unit (15)
(Fig. 7)
, ensuring that the carry
handle (1) is at the top. Tighten the 4 screws (provided)
clockwise with the screwdriver
(Fig. 8)
.
